SOHC.co.uk Forums > CB350/400

Recommendations on Engineers for Re-bore/ Head skimming/ Valve seats/ Cleaning

(1/1)

Andrewd2667:
I would greatly appreciate if anyone can advise/recommend on engineering services in (Hertfordshire would be ideal) to do the following on the CB400

1. Re-bore and honing -
2. Head skimming
3. Valve seats / valves lapping
4. Cleaning - Vapour blasting

The picture is of the guilty piston - it must of had a hard life.

Laverda Dave:
Even though I live in Middlesex I use J D Autoworx in Wallington, Surrey.  Highly recommended, they did a lot of work on my 400/4.

Trigger:

--- Quote from: Andrewd2667 on January 23, 2017, 11:21:48 AM ---I would greatly appreciate if anyone can advise/recommend on engineering services in (Hertfordshire would be ideal) to do the following on the CB400

1. Re-bore and honing -
2. Head skimming
3. Valve seats / valves lapping
4. Cleaning - Vapour blasting

The picture is of the guilty piston - it must of had a hard life.

--- End quote ---

Try T&L Engineering up the road from you in Bedford.

Navigation

[0] Message Index