SOHC.co.uk Forums > CB750

Removing head with engine in.

<< < (4/5) > >>

onethumb:
Bryan and trigger I'm one of those people


Sent from my iPhone using Tapatalk

Bryanj:
You are right Trigger, but on the tin it sez Grinding paste usually coarse at one end and fine at the other

Trigger:

--- Quote from: Bryanj on February 19, 2017, 10:56:06 AM ---You are right Trigger, but on the tin it sez Grinding paste usually coarse at one end and fine at the other

--- End quote ---


Mine definitely says Lapping paste  ;) Should I be using Grinding paste Bryan ?

archmill:
Bought valves, valve retainer plates, guides and stem seals from cyclex in USA for £260. Adding postage, VAT and auntie Teressa's cut ( import duty ) came to £350. The valve retainer plates are to stop the valve collets pulling through, which is exactly what happened before I got the bike

archmill:
P.S. you can't remove the head with the engine in place. I made and fitted a frame kit which allows you to remove a section of frame, them you can remove the head and cylinders.

Navigation

[0] Message Index

[#] Next page

[*] Previous page