Other Stuff > Interchangeability

CB500 Front brake hose

(1/2) > >>

sgd37:
Hi gents,

Looking to replace my front brake hoses. Does anyone know if the 750 brake hoses would fit on a 500.

Also would it be possible to replace rocker shafts which come as one per rocker for the later models 550 with one for two rockers, or should I lathe my own.

cheers

Trigger:
Yes and Yes but, the hose comes in different lengths for hi or low bars

Bryanj:
There are three different rocker spindles
(1) the eight loose
(2) the four loose
(3) the four locked as on late 550's

Not 100% sure but I don't think you can fit the locked ones to any early cover (1) & (2) should interchange

sgd37:
Great good to know. Guess I'll measure my old hose for the length.

As for the spindle seems it's possible to fit the locked type after some modifications. Found this on youtube
https://www.youtube.com/watch?v=MDIkDb_HhKw

So would any of you two gents have four candles...I mean four lockable spindles

Cheers

sgd37:
maybe i could just drill a hole for the screw. Shouldn't affect the structural integrity too much should it? the screw would probably give out before the spindle if something happens.

How much would you want for four of them? Saw your edit

If I were to make my own what material would I use?

Navigation

[0] Message Index

[#] Next page