SOHC.co.uk Forums > CB350/400

oil pressure switch testing

(1/1)

billdn:
Is there a way of testing an oil pressure switch to see if it works. i appear to have continuity in the wire but not sure if the switch works. it is not a new part and is part of the very long rebuild re-using as many parts as i can .

Trigger:
A air line and a multi meter ;)

billdn:
Being bit thick here -guess air line goes on base that goes in oil pump . What psi would you recommend? Not sure what to do with multimeter..part is not fitted to bike.  :)

Trigger:

--- Quote from: billdn on March 22, 2017, 08:17:38 PM ---Being bit thick here -guess air line goes on base that goes in oil pump . What psi would you recommend? Not sure what to do with multimeter..part is not fitted to bike.  :)

--- End quote ---
Can't be bothered to explain but, here is a good vid that explains >>>https://www.youtube.com/watch?v=mF0fdo04pBY

billdn:
Doddle, thanks for the clip. Easy when you know how or more exact someone shows you. Cheers.

Navigation

[0] Message Index