Other Stuff > Tricks & Tips

Grease is the word

<< < (4/5) > >>

hairygit:
Yes you can, that's what Bryan was saying, but the but nut would end up on the wrong side. If you use a piece of bar to tap the pivot out, sort the grease nipples, the n use the pivot to tap the bar out, you can put it back the right way round.

Sent from my X6pro using Tapatalk

MrDavo:
Ah, now I get what he meant, stupid me.  ::)

I see the nipple fits many different Hondas and is available from the US, not that dear so no duty hassles etc. I take Bryan's point about a hollow drift (I could always drill a suitable blind hole in something), how hard is it to get them out without snapping them or leaving something behind though?

petermigreen:
Just did mine at the weekend.
Pulled out easily enough gripped wit a pair of pliers, then knocked the new ones home using a small 6mm socket from a small 1/4 drive set.
Nipples came from dss
Peter

MrDavo:
DSS had none (Coz Peter bought them all) but I managed to order a pair online from Fowlers, never tried them before, but it saves the stupid delivery charge & wait from USA.

petermigreen:
You snooze you loose....

Sorry about that.

Peter

Navigation

[0] Message Index

[#] Next page

[*] Previous page