SOHC.co.uk Forums > CB750

clocks are these right?

<< < (6/7) > >>

Frank1e:

--- Quote from: csd4t on April 02, 2017, 09:02:08 PM ---Don't forget to use the correct spacers or you could kill your unicorn!

--- End quote ---

I have no notion what spacers you are referring to...but i did notice a thick washer in the slot of each of the pinch clamps..did think ..what the hell are they thinking of ?...
No no we must preserve the Unicorn !
Tell us more...please/thank you
 

Trigger:
The washers in the unicorn are called D washers. They stop you over doing the pinch bolts, without these you may crack the top yoke.

RGP750:
Yes the spacers or 'D' washers are there to stop over
 tightening the clamps and cracking the unicorn.
Just keep them with the yoke if you sell it on.
Rich

RGP750:
Cor that was good timing Trigg Both posts arrived together

Trigger:

--- Quote from: RGP750 on April 03, 2017, 07:02:21 AM ---Cor that was good timing Trigg Both posts arrived together

--- End quote ---

I was in by 1min and 16 sec  ;D ;D You must of been buttering your toast at the same time  ;)

Navigation

[0] Message Index

[#] Next page

[*] Previous page