SOHC.co.uk Forums > CB350/400

Nice looking 350

(1/2) > >>

Trigger:
I kept looking at this bike and then realised that the front mudguard is on the wrong way >>>  http://www.ebay.co.uk/itm/Honda-CB350-Four-1974-L-reg-Rare-Classic-Motorcycle-/332175907387?hash=item4d573a1a3b:g:fVoAAOSwpP9Y5odt

Orcade-Ian:
Bit of a puzzle that one - must have had the riveted centre bridge removed and refitted. Can't quite see if it's bolted back or riveted again.  Wouldn't fit by simply reversing as the holes would be completely out of position and the brake pipe clip on the other side.  Speedo cable grommet hole definitely at 12 o'clock on the wrong side.  Was it deliberate?  Front tyre looks larger section than the rear - wonder what else is arse about face?  Never seen one registered over here as early as 1980  before.
Ian

royhall:
Your right about the mudguard, and the tyres are fitted back to front. That is no way Candy Bachus Olive, it's just a flat British Racing Green with clear coat on top (unless the pictures he took are way off).

Orcade-Ian:
I know I wouldn't sell mine at the price it's at on the auction just now.  He's probably buggered up the front of a perfectly good front mudguard fitting that mud flap - thought at first it was a front guard in one piece from a GL1000.  Even the very good DS copy is riveted the right way round. How could he get the tyres on the wrong rims?  I know they will fit but surely a proper tyre fitter would have questioned him?

Ian

Chris400F:

--- Quote from: orcadian on April 10, 2017, 01:26:26 PM ---He's probably buggered up the front of a perfectly good front mudguard fitting that mud flap.

--- End quote ---
I can't see any extra holes or fittings so suspect it may be fitted using the stay mounting screws.
What beats me is why anyone would dismantle the brace from the guard in the first place, before reassembling it wrongly.
Can't see whether it has been riveted back together or the rivets replaced by screws.

Navigation

[0] Message Index

[#] Next page