SOHC.co.uk Forums > CB350/400

Valve guide seals

(1/1)

mike the bike:
In the gasket set (from DSS)  there's 8 valve guide seals, as one would expect.   I've replaced the inlet seals but are there seals on the exhaust valve guides?  The reason for the confusion is;
* There's no old seals fitted
* The valve guides don't have a sharp edge to keep the seals on properly. I've done two before the penny dropped.
Ta

Mike

kevski:
On the earlier 350 motors none on the exhaust side.

mike the bike:
OK, thanks.  I won't waste any more time on it.

Navigation

[0] Message Index