SOHC.co.uk Forums > CB350/400
Main Bearing Shells proud of Crankcases
simco1964:
Hi Roy,
Find attached Photo's of crank etc, may have to 2 Posts for all the Photo's.
Have taken a couple of side Photo's of shells in casing, see what you think? it looks like to me if the shells are not tight to the casing at the bottom? or is it just an optical illusion?
Cheers
Simon
simco1964:
More Photo's
hairygit:
Try fitting the bearings to the top casing as well, then place on top of the lower casing, and GENTLY push them together, the chances are the bearings will push down into the correct location, but do be gentle, as you don't want to damage the shells trying to force them.
Sent from my X6pro using Tapatalk
simco1964:
Hi Hairygit,
When assembling casings as you've explained, do I fit bolts and torque as per Haynes Manual?
Regards
Simon
hairygit:
You can do, but even just pushing the casings together and having a look should give you an idea of what's going on.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version