SOHC.co.uk Forums > CB750

Front brakes sticky (dual disc)

<< < (3/3)

mike the bike:
Have you replaced that square section seal in the caliper - the one the seals against the piston? 
I read on this here forum somewhere that that seal can cause the piston to stick if it's worn.

El__burro:
What did you use to hold the calliper arm on the right hand side? The spring like the one on the left will not work..
Thanks
el__burro

Sent from my SM-G935F using Tapatalk

Johnwebley:

--- Quote from: El__burro on May 03, 2017, 10:54:29 PM ---What did you use to hold the calliper arm on the right hand side? The spring like the one on the left will not work..
Thanks
el__burro

Sent from my SM-G935F using Tapatalk

--- End quote ---

 the spring is not essential,you can adjust the arms,as long as the pad faces are parrallel  to the disc,

philward:
I used these - http://www.ebay.co.uk/itm/1-5mm-Helical-Compression-Springs-zinc-DIN2095-x-25mm-to-100mm-long-deals-/331752550229?var=&hash=item0
Don't forget that the spring will be longer than the L/H spring due to the fork leg lug being in a different position

Navigation

[0] Message Index

[*] Previous page