SOHC.co.uk Forums > CB350/400
Clutch Switch wiring
mike the bike:
Its a small rectangular black plastic thing about half an inch big. (Don't correct me on the size, I'm not going to measure it)*
It's under the LH sidepanel and it just pulls out.
* there's some picky sods on this forum. ;D
Nurse Julie:
--- Quote from: mike the bike on May 04, 2017, 05:27:28 PM ---
* there's some picky sods on this forum. ;D
--- End quote ---
;D ;D ;D ;D ;D Who would that be then Mike ?
stevush:
Found it.. I have a couple of spares too. When the meter is switched to Diode test mode its also continuity ?
It beeps for continuity in both directions on all the diodes I have ?
I'm confused :)
Steve
mike the bike:
I never use the diode test function; I use the low ohm setting. I think a battery and bulb gives a more reliable test.
stevush:
Testing with a bulb and a battery, the bulb lights both ways, all the diodes I have read the same. Does that mean they're all duff ?
Steve
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version