Other Stuff > Tricks & Tips

Brake/Clutch Lever Protectors

<< < (2/2)

MrDavo:
Hot water. Not boiling but very hot, in a cup, take out to garage. Chuck rubber part in for a minute or two, until it softens, fit while still warm.

I use the same method for rubber and plastic fuel / oil / breather lines that are a tight fit, works every time. With say a breather pipe you only have to put the end of the pipe in the hot water. When it cools the rubber re hardens and will be as snug as a snug thing.

Navigation

[0] Message Index

[*] Previous page