SOHC.co.uk Forums > CB350/400

Gear lever circlip groove wear?

<< < (2/2)

mike the bike:
I had a closer look at mine; It's been a while since I modified it but I drilled through the shaft and fitted a split pin.

Clem2112:
I guess a washer and split pin or R clip would be option 2.
 First find a sharp 1.5 mm drill

Clem2112:
Drilled it. Stainless washer fettled to fit the pivot and retained with a split pin.
I defy it to fail again !

Nurse Julie:
I think I should do the same modification sometime, it's really not a nice feeling when you go to change gear and there is nothing to change gear with !!!

Navigation

[0] Message Index

[*] Previous page