SOHC.co.uk Forums > CB750
Have i got the right carbs?
FatFreddy:
Wwll i've found out why the bike was running so rich and rough.
have a look at the picture below and see if you can spot the problem!
Yes i did fix it, and the bike is now running like a dream. Or rather it will just as soon as i get the old front wheel bearings out and replace them with some shiny new ones. Got a problem with the removal of the retainer ring.
Post edited by: FatFreddy, at: 2007/05/04 16:57
FatFreddy:
Here's another picture of the main offender,
I haven't a clue how i/it managed to end up like that! Good job i quite skillful with two pairs of pliers.
Post edited by: FatFreddy, at: 2007/05/04 17:00
Asimohonda:
:) I bought a set of K4 USA Spec carbs off eBay USA as my F1 ones were full of crud & crap & glued up with old petrol plus the carb rubbers were very bad \"mice had eaten holes in them\". I was shocked by the price off new carb rubbers
Spitfire:
Well spotted that man, if you are having problems in the wet try sealing the HT leads where they go in the coil, I used Araldite in the old days but nowadays some doorframe sealant would do a better job.
If it works I've posted a photo of the wheel bearing retainer removal type tools I use, very low tech.
Cheers
Den
Navigation
[0] Message Index
[*] Previous page
Go to full version