SOHC.co.uk Forums > CB350/400

M8 x 125mm Bolt

<< < (2/2)

simco1964:
Hi,
    My first thought was crankcase bolt as I did have to source one due to me possibly mislaying one or not!! but then its rather long to go there?
 The bolt was measured from underneath bolt head. Also no crash bars fitted.
Well it may be the case of waiting for something to fall off or fail?

I hope neither
Simon

royhall:
If all the holes have bolts in them your good to go. If not put it in the empty hole. Or did I miss something here?

simco1964:
HI,
   Bolt not flanged and no vacate holes!! well not anymore!
Going to have to bite the bullet and go with it, if it starts and runs that will be good enough!!
Simon
 

mike the bike:
If it isn't flanged then it ain't a crankcase bolt.  It's probably a stray one put there to wind you up.

mike the bike:
I'm referring to 400s, not 500s.  Having reassembled the engine about 40 miles ago, I'd remember a bolt like that.

Navigation

[0] Message Index

[*] Previous page