SOHC.co.uk Forums > CB350/400

combined rectifier regulator

(1/1)

oapcb400:
Hi, first time on here. I am slowly restoring a 77 cb400f, its never going to be a museum standard job. The wiring is mostly unusable,so working with a new loom. Basic home electrics i can just about handle, but not too sure about 40 year old bikes. The old reg/rec is being replaced with an Elecrex reg/rec from Dave Silver, it seems straight forward. My question is when all wired up as per the instructions,on removing the old regulator there is a spare green earth lead, do i simply bolt this to a nearby frame lug? is it that simple.

BigAl (Alan):
The spare D/Green wire/Flag connector (as image) that's normally connected to the old regulator can be left loose.
Handy to have if you need to revert back to the OE rectifier/regulator set-up.

Navigation

[0] Message Index