SOHC.co.uk Forums > CB750
Does this 750K5 look a good buy?
AshimotoK0:
--- Quote from: Trigger on July 19, 2017, 06:40:59 AM ---Never believe a parts list, they had changed to 7mm bolts by then ;)
It was superseded from 53230-341-700 to 53230-341-305 for the K5 and K6.
--- End quote ---
I think you could forgive us for questioning it though ..seeing as it's listed in the Parts Book !
Perhaps you could share with us the most glaring errors you have from the Honda Manuals Graham.
Trigger:
Many member contact me questioning parts book/manuals, ask RGP about the incorrect crank case bolts ;D
I have never read a parts manual, so I only know though experience if something is correct or not ;)
AshimotoK0:
--- Quote from: Trigger on July 19, 2017, 01:18:57 PM ---Many member contact me questioning parts book/manuals, ask RGP about the incorrect crank case bolts ;D
I have never read a parts manual, so I only know though experience if something is correct or not ;)
--- End quote ---
Fair enough .. I start a thread in Anorak's corner :) Maybe some other members can contribute !
AshimotoK0:
Still confused though ... got this from another site: http://honda750expert.com/
Do not install top bridge without two special notched
D-shaped spacer-washers 53235-300-000 Honda 750 top bridge spacer washer 53235-300-000, one each,
at center in Honda triple tree top bridge washe reach center gap area,
or top bridge can crack when tightening around fork tubes.
Top fork bridge part number:
up to frame #1003433 (sandcast 1 to 3433), 53230-300-010,
superseded by 53230-300-315;
after frame #1003434 (sandcast 3434 to 7414), 53230-300-020,
superceded by 53230-300-673, later superseded by 53230-300-315.
After sandcasts, 53230-300-315 through end of K2.
(NOTE: it has been reported that in Europe and some other countries outside of the US,
the 'unicorn' style was used through the 1975 K model)
Insider Tip: measure the width of the 'tip of the unicorn horn'
if you are buying a used part-- that was one difference.
2. US K3-K6
Uses a small black meter bracket to connect gauges.
Do not install top bridge without two special notched
D-shaped spacer-washers 53235-300-000 Honda 750 top bridge spacer washer 53235-300-000, one each,
at center in Honda triple tree top bridge washereach center gap area,
or top bridge can crack when tightening around fork tubes.
Top fork bridge part number:
53230-341-305
paulbaker1954:
Im no expert on 750 prices but looks expensive to me compared to others on offer eg..
http://www.ebay.co.uk/itm/Honda-CB750-Four-K3-1973-Flake-Sunrise-Orange-Colorado-Import-2015/372015504960?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D2%26asc%3D20140122125356%26meid%3De168bbbe88f146038e0bd3b2f992548f%26pid%3D100005%26rk%3D2%26rkt%3D6%26mehot%3Dpp%26sd%3D253040407868
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version