SOHC.co.uk Forums > CB750

new chain and sprocket vibes

<< < (2/3) > >>

mike the bike:
Well spotted.

royhall:
The f2 sprocket fitting is different to the k models. Sprocket probably wrong way round.

Sent from my Nexus 6 using Tapatalk

adriangsmith:
Thanks all, I'll check that tonight and get back to you all.

adriangsmith:
You were right Royhall, had the sprocket round the wrong way, chain has worn a small groove in the lower engine cases but should be OK still.
Also have seen some rubbing on the sprocket engine cover.
Hoping all will be OK otherwise i'll be switching back to the the 530 chain setup.

Out of interest does the chain retaining bolt have a special washer? Mine just has a m8 penny washer on it and the sprocket still has some movement in it is this correct?

royhall:
That is not correct, there should be the penny washer then a spring washer....... Good your sorted, glad I could be of assistance for once....... Got the T-shirt myself for that one.

Navigation

[0] Message Index

[#] Next page

[*] Previous page