SOHC.co.uk Forums > CB350/400

New Paint and moving bits.

<< < (2/2)

petermigreen:
Striking looking bike. Well done.
Peter

mike the bike:
I'm glad you used 2K rather than cellulose.  It looks more professional than cellulose.   I'm going to spray the K75 when I get around to it (probably next year, too much on at the mo)  I know it's toxic and all that, any advice for us?

gtmdriver:
I'm not recommending this in any way but I sprayed all the bits just inside my garage with the door wide open and paused to breathe fresh air regularly.

Remember it's isocyanates not cyanide as some clowns on the internet keep repeating. Isocyanates are harmful in quantity but nothing like cyanides which are fatal in small parts per million.

The drawback is that things tend to fall or fly into the paint but it all flats out and polishes up in the end.

Also beware the dry spray from 2k clear lacquer. It sticks like glue wherever it lands. I've had to T-Cut my glasses.

Green1:
I don't recommend breathing anything in when spraying anything always wear the right sort of respirator.
I spray a lot of water based paints at work sometimes between 30 and 40 gallon a day it can make you pretty sick.
Not that you will use that much in the garage at home

Navigation

[0] Message Index

[*] Previous page