SOHC.co.uk Forums > Project Board
CB750K4 New project
Rob62:
Its aliiiieeeeeeeeeeeve......!! ;D
SteveD CB500K0:
I think we’ve all had one of those moments
Sent from my iPhone using Tapatalk
Nurse Julie:
Oooooooooooh, how exciting. Having been through it twice with two bikes very recently, I can remember the feeling well. Just wait till you fire her up, even more exciting ;D
mike the bike:
+1 on that. There's nothing like the sound of a dead engine coming back to life.
Rob62:
Had a frustrating couple of days in the garage since returning from holiday on Thursday... Routing and re-routing cables to finally get them something like... But mainly with the elctrics. All of the components are back on the machine except for the speedo and tacho (2 wires each so should be simple enough). All the plugs around the battery box are straight forward and basically impossible to get wrong although there is a green and a red spade connector which appear to be redundant (not connected when I bought the machine)... top right of photo.
On paper connecting all the wires in the headlight bowl should be easy enough as they are all colour coded. However once connected i have a working tail light, the starter button doesn’t do anything, the oil pressure light was on but now off, the neutral light works ok. The indicators were missing so i now have some new stanley indicators with non std color coded wires which could be part of the issue. Once i connect them the left indicator comes on but doesn’t flash the right doesn’t come on but the flasher unit clicks and then when i turn the light switch on the left indicator comes on and the fuse blows!.... I’m not asking anybody for a full diagnosis here but if i could get a little info to help me work out how it should all work that would be great. For example the indicator circuit has green wires, blue wires, orange wires, orange/white wires and blue/white wires. If i knew what all the colours were i.e. live, earth etc it would help me to try and work my way through the wiring diagram. There are also lots of black wires with multi connectors, are these earths or live?. One final question, the front indicators have three wires each, two coming through the stem and a green earth? On the nut inside the headlight bowl. The rear indicators also have two wires coming through the stem but no green earths, but there are places for earths on the bracket where the rubber mounting fits..these aren’t shown on the wiring diagram? Any help greatly appreciated. PS the photo is before the strip down i.e. how it arrived to me.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version