SOHC.co.uk Forums > CB350/400

CB400 Rectifer / regulator

(1/2) > >>

Integra99:
I'm just in the process of rebuilding my CB400f... while the frame is away I'm sorting the loom. A quick question I'm upgrading to a reg/rec combined unit, my new one has two feed wires, white and black but the original rectifer has a green wire also... does anyone know if this can be ignored ?

Thank you

Johnwebley:
if you are using the RR24 combined unit,

 the other was regulator ground/earth,so can be ignored

Integra99:
Ok great so the spare green is just an earth.. so I can tape it up?

I'm using a yamaha XS750 combined unit as I have a spare.. has exactly the same plug and 2 rectifier outputs just like the David Silver upgrade. 

Johnwebley:

--- Quote from: Integra99 on September 08, 2017, 03:22:43 PM ---Ok great so the spare green is just an earth.. so I can tape it up?

I'm using a yamaha XS750 combined unit as I have a spare.. has exactly the same plug and 2 rectifier outputs just like the David Silver upgrade.

--- End quote ---

 this is the unit I was talking about,

http://www.electrexworld.co.uk/acatalog/RR24.html


 use the link to check wiring details

gtmdriver:
I'm using the Electrex World unit on my CB350F and the green wire can just be taped up out of the way.

Navigation

[0] Message Index

[#] Next page