Other Stuff > Misc / Open

gap B carburettor fast tickover CB400f

(1/1)

speedibee:
In my haynes  it says adjust gap B ,that is the screw and lock nut which increases the revs while the choke is on , but it doesn't say what the gap is supposed to be , the actual screw and nut are tucked away between the other mechanisms and would be too hard to get at while fitted to the bike ,so I need to know gap B before I fit the carbs back on .

Nurse Julie:
Turn over the page to page 65, No.10. Is says 0-0.3 mm or 0-0.012 inch.

speedibee:

--- Quote from: Nurse Julie on September 20, 2017, 06:17:13 PM ---Turn over the page to page 65, No.10. Is says 0-0.3 mm or 0-0.012 inch.

--- End quote ---
Thanks very much  Nursie , I have found it right where you said it was ,,

Nurse Julie:

--- Quote from: speedibee on September 20, 2017, 08:42:56 PM ---
--- Quote from: Nurse Julie on September 20, 2017, 06:17:13 PM ---Turn over the page to page 65, No.10. Is says 0-0.3 mm or 0-0.012 inch.

--- End quote ---
Thanks very much  Nursie , I have found it right where you said it was ,,

--- End quote ---
Good, I did have to look in the manual myself, not for the gap size, sad as it may seem I knew that but didn't know the page number  ;D

Navigation

[0] Message Index