SOHC.co.uk Forums > CB750

Dual Disk question - not how to

<< < (2/2)

Rob62:
Thats good to hear, hopefully mine will be ok too with new pads and hoses.

Johnwebley:
I have done my 500,

 the R/H caliper mount needs careful alignment,

 also use a double length banjo bolt on the tree to mount the second pipe,
and a GL1000 master cylinder from David Silver for about £30 sorts the actuation,

  stops very well,

burchy75:
Cheers all for the replies

I'm going to try and explore the mirrored bracket option as I'm a bit of symmetry geek.  if it doesn't work out then I can always try the later caliper arms/supports and spacers.

Bryanj:
To get a mirrored bracket you cut one of the mounting bosses(6mm bolt from memory) off the bracket and put a similar size on the other side

Navigation

[0] Message Index

[*] Previous page