SOHC.co.uk Forums > CB350/400
CB400/4 ENGINE STRIP, ASSESSMENT AND REBUILD BY JULIE - NOW COMPLETE
UK Pete:
--- Quote from: Nurse Julie on January 03, 2018, 01:35:15 PM ---
--- Quote from: UK Pete on January 03, 2018, 01:33:26 PM ---
--- Quote from: Nurse Julie on January 03, 2018, 12:48:58 PM ---
--- Quote from: paul gledhill on January 03, 2018, 12:35:29 PM ---Are you doing it Julie ;) ;)
--- End quote ---
Ha, not on your Nellie Paul. I am staying right away from all the machine work, that's Trigs department. I can just imagine the reaction from him if I got it wrong or messed up or broke a boring bar or whatever it's called. No, let those that know what they are doing......do it !!!
I'm getting quite excited now as this is the last of the machine work, then I can just re assemble the top end. I have already re built all the individual components for the top end so just a case of fitting the pistons/ rings and finish building up from there.
--- End quote ---
Does trigg do rebores
Sent from my SM-G930F using Tapatalk
--- End quote ---
Yes Pete, he does
--- End quote ---
Can you get him to pm me a price for 750 I have pistons and rings
Sent from my SM-G930F using Tapatalk
Nurse Julie:
--- Quote from: UK Pete on January 03, 2018, 01:37:45 PM ---
--- Quote from: Nurse Julie on January 03, 2018, 01:35:15 PM ---
--- Quote from: UK Pete on January 03, 2018, 01:33:26 PM ---
--- Quote from: Nurse Julie on January 03, 2018, 12:48:58 PM ---
--- Quote from: paul gledhill on January 03, 2018, 12:35:29 PM ---Are you doing it Julie ;) ;)
--- End quote ---
Ha, not on your Nellie Paul. I am staying right away from all the machine work, that's Trigs department. I can just imagine the reaction from him if I got it wrong or messed up or broke a boring bar or whatever it's called. No, let those that know what they are doing......do it !!!
I'm getting quite excited now as this is the last of the machine work, then I can just re assemble the top end. I have already re built all the individual components for the top end so just a case of fitting the pistons/ rings and finish building up from there.
--- End quote ---
Does trigg do rebores
Sent from my SM-G930F using Tapatalk
--- End quote ---
Yes Pete, he does
--- End quote ---
Can you get him to pm me a price for 750 I have pistons and rings
Sent from my SM-G930F using Tapatalk
--- End quote ---
Yes Pete, I will ask him to PM you.
Johnwebley:
Keep up the excellent thread. As the bores/pistons/rings are the only major replacement parts.
What does Trig advise for oil and running in etc
Sent from my SM-G361F using Tapatalk
Nurse Julie:
--- Quote from: Johnwebley on January 03, 2018, 02:16:35 PM ---Keep up the excellent thread. As the bores/pistons/rings are the only major replacement parts.
What does Trig advise for oil and running in etc
Sent from my SM-G361F using Tapatalk
--- End quote ---
If I had my way I would take the advice of the Drag Boys and take it down the 1/4 mile absolutely screaming it's arse off :o................................. or I could pootle around at 20 mph for the next 10 years and end up with the pistons in the same state they were in when I started :'(.
But Trigs running in advice on this engine is 10w40 Mineral oil, ride it mid range revs, get it very hot with lots of cool air blowing around the barrels and change the oil at 500 miles.
paul G:
Good luck getting the rings in Julie if he makes it as tight a tollerance as he did mine.
Good job the 400/4 has a very generous lead in ;D ;D
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version