SOHC.co.uk Forums > CB350/400

Rear Brake Return Spring - CB400f

<< < (2/3) > >>

Integra99:

Ah ha in that case my spring has snapped!! David Silvers again.. lol!! Thanks Paul .

paul G:
You can just see it on this but not clear as I have had to blow it up.

paul G:
£15.50

Laverda Dave:
Place a bit of heat shrink on the long tail of the spring otherwise it will mark the paint on the frame. Honda used a piece of very tight fitting, thick walled rubber type material. I had to use a heat gun to make it go pliable to remove it before getting the spring re-zinc plated.

mike the bike:
That's a good tip.

Navigation

[0] Message Index

[#] Next page

[*] Previous page