SOHC.co.uk Forums > CB750

Crankcase seal leaking

<< < (9/10) > >>

mike the bike:
The crankcase isn't pressurised, just the oil in the oilways.

kevski:

--- Quote from: mike the bike on November 20, 2017, 07:21:44 AM ---The crankcase isn't pressurised, just the oil in the oilways.

--- End quote ---
We know the case is not pressurised, and as the seal is static and the crank has end float the seal isn't either, so where did the 50psi come from?

Blasta:
The weather here is perfect for riding at the moment and I can't keep off the bike  :).....so I've put about 700km on it now and it's still ok.
Will report back as I get more kms on it.

Rob62:
It will be ok, so long as you managed to avoid damaging the lip as you pressed the seal over the shaft... which you appear to have done successfully..... if it was gonna leak it would have done by now. Relax, job done  8)....

Hope I haven’t just put a curse on the job  :o

Moorey:
Report back next week when you have done 5k on it. Enjoy.  ;)

Navigation

[0] Message Index

[#] Next page

[*] Previous page