SOHC.co.uk Forums > CB350/400
400/4 Seat (DS)
Clem2112:
These metal based DSS seats are pretty close to the original... maybe the rear is taller than I remember compared to the seat on my original F2. I have two plastic based ones, one from DSS ... neither fits as well.
Also got a stencil from Piki.... from Spain ?....I used a leather/vinyl silver spray paint that Timpsons sell !
Nurse Julie:
--- Quote from: Clem2112 on December 11, 2017, 09:03:29 PM ---
Also got a stencil from Piki.... from Spain ?....I used a leather/vinyl silver spray paint that Timpsons sell !
--- End quote ---
That's the paint I use, works well and I get about 10 stencils out of each can, doing 5 thin coats per seat.
Integra99:
I have an original seat base with mounting brackets.. its been welded and has some rot on one corner that could use a little weld but apart from that its rock solid. I also have foam and vinyl cover with strap , I suspect even though the cover is old it may be a replica but always looked OEM. PM if interested.
PatM:
the two f/g seat bases I had were worn and the bracket moved (not while going along!)- so the DSS seat overcame this obvious defect and the fact that when open for servicing- the f/g was strained and cracking.
Regardless of the HONDA stencil on the back, Id recommend the replacement/upgrade. You can also adjust the position of the lock male spigot once more!
flatfour:
I've bought a DS metal - base seat and used it for this year's riding season. It all seems to be well made and is very comfortable - recommended!
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version