Other Stuff > Misc / Open

Anyone know of a source of CB750K0/ Cb250/350K0->K3 Ignition switch connectors ?

(1/2) > >>

AshimotoK0:
Closest I have found is by Yazaki in this link  but in white plastic. I wonder if Yazaki terminals are compatible with the Reddy/Brown Honda original items. A question for BigAl on here I guess ?

http://www.easternbeaver.com/Main/Elec__Products/Connectors/Sealed/YPC/ypc.html

Also: Here but closed for Christmas so you can't view  :(

http://www.cycleterminal.com/yazaki-ypc.html#

[ Guests cannot view attachments ]

UK Pete:
Never seen them before ash
I am after k0 loom to alternator, and loom to rectifier connectors with out the secure catch
If you know of any supplier

Sent from my SM-G930F using Tapatalk

BigAl (Alan):
Searched for this connector many times (Brown..ish & white) with no success. The pin sizes on the connectors are 2.25mm to 2.5mm, so it may be possible to find the plug/socket terminals.
Image attached of the brown...ish plug and an 8-way plug fitted 'only' on the CB500K0, also fitted with 2.25/2.5mm terminals. Honda may have had a reason to phase out these particular connectors?...if you do know of a source of the connectors, then please get in touch.

Bryanj:
I think Honda phased them out as when you disconnect and reconnect the pin connectivity worsens which it does not do on the spades

AshimotoK0:
Well ...I just found a source of the mating half  ;)

[ Guests cannot view attachments ]

Navigation

[0] Message Index

[#] Next page