SOHC.co.uk Forums > CB350/400

Spark erosion

(1/4) > >>

Laverda Dave:
I've made a real schoolboy error  :-[ with the CB250RS engine and now I need a pin spark eroded out. Does anyone know of anyone who can offer this service? All the company's that advertise are only interested in mass production work and not one-off's. Happy to send the part (it's the rocker cover) anywhere as it's only small.

Trigger:
Show a pic of what needs to come out

Tomb:
Will a slide hammer not weld to it?

Laverda Dave:
Here's the offending pin, it's 5mm diameter x 28mm length (although shorter by 8mm now as a bit broke off trying to remove it using heat, dremmel, pliers etc.
I can't believe I put the pin back but forgot to check the spindle at the other end was in alignment with the bolt hole.....it wasn't and I only realised when I went to refit the rocker cover! I shouldn't have been working in a cold garage when I wasn't feeling well myself!!!

Laverda Dave:
Its the pin on the right, the one on the left is fine!

Navigation

[0] Message Index

[#] Next page