SOHC.co.uk Forums > CB750

One for the ex MOT Testers!

(1/4) > >>

philward:
Just weighing up basic lighting for CR750 Rep and looking to fit the most discreet lighting as possible - probably projector type (as MarkCR has). For the purpose of the MOT, do I need a high beam or can I get away with just the low beam? Its only going to be used as daytime running light.
Thanks

Trigger:
You need a High beam to pass a MOT, I did explain this to Mark when i was advising on the lights. If you go for a day time only, then you will have to put a running light on after ;)

philward:
thought so!

haynes66:
things may have changed by now but i mot'd my tl125 for daytime use only with no lights at all. i wired in a brake light afterwards just to be on the safe side..

Trigger:

--- Quote from: haynes66 on January 07, 2018, 03:18:11 PM ---things may have changed by now but i mot'd my tl125 for daytime use only with no lights at all. i wired in a brake light afterwards just to be on the safe side..

--- End quote ---

That is what I just said ! No lights for day time use only  ;)

Navigation

[0] Message Index

[#] Next page