SOHC.co.uk Forums > CB350/400

Checking Stator

(1/3) > >>

Integra99:
Hi guys.. can anyone help me with how to check my stator is working.

I've hooked up the new reg/rect and I'm getting about 12.75 up to 13v with a few revs so no where near enough.

Is there a way to check the yellow wires.. are making a current as its seems I'm down a little.. many thanks!

paul G:
Hi,
      Get a multi meter and check the yellow wires individually to ground, there should be no continuity.
Also check the yellow wires to each other in pairs.
I do have a guide to all this somewhere I will see if I can find it out.

paul G:
These may help

paul G:
These may help

Integra99:

Thanks Paul, most helpful I will print these out.. without sounding useless how do you use the multimeter to test the yellow stator wires for resistance?

Just a thought I'm running 3 ohm coils.. with the increased resistance could this affect my charge rate?  I plan to fit Dyna k ignition but assumed it would be ok.

Navigation

[0] Message Index

[#] Next page