SOHC.co.uk Forums > CB750
David Silver repalcements fork tubes
UK Pete:
My forks from ds are for the k0 this has lots of clips pistons and bits that attach to the bottom fork leg the problem with mine was the thickness of chrome would not allow all the pistons and bits to fit, option was remove chrome or some material from the inside of the pistons and bits a major pain in arse
Not aware of clonking but I have not used them yet
71 V12:
Thank you for the feedback, if I understand correctly I should be able to build up my forks ok with the DS stanchions on my K4 (less complex assembly than K0?) But the K2-6 type are susceptible to clonking when bottoming out.
Nothing ever straight forward in the restoration game!
philward:
Maybe its a problem that doesn't relate to the DS stanchions but when I posted about the problems, someone commented that another member had had the same problem and related it to the DS stanchions. Can't find the post now.
If you don't have a problem, let me know and I'll look for another reason why my bike clonks!
Navigation
[0] Message Index
[*] Previous page
Go to full version