SOHC.co.uk Forums > CB350/400

CB400F Ignition Switch

(1/3) > >>

thegreatpan:
One of the issues I had when recommissioning the bike,  was the ignition cut out a couple of times on the initial test rides. I have dismantled the ignition switch, and noticed that the white plastic part with the electrical contacts bit at the bottom of the barrel part, has been subject to heat, presumably from internal corrosion.  The result is the plastic part is melted!

Does anyone know if it's possible to just get the plastic part, or do I need a whole ignition switch, also is the DSS part interchangeable, in as much as I was thinking of buying one just to get the white part, thereby allowing me to keep the original barrel part and keys.

Hope this makes sense.
Thanks Dave

AshimotoK0:
I don't think they are available as a separate item.I will look in my bits & see if I have anything.

hairygit:
To give you more options, the 550F1 &550F2, 550K3, 750F1, and 750F2 all use the same ignition switch as the 400 Fours.

Sent from my X6pro using Tapatalk

thegreatpan:
Thanks Ash

petermigreen:
http://www.ebay.co.uk/itm/MS-Ignition-Switch-Repair-HONDA-CB-400-F-Four-75-77-CB-550-F-Supersport-75-80/152409884173?fits=UKM_Make%3AHonda&hash=item237c56460d:g:TS4AAOSwjDZYiKG3

I bought one. no problems.
Peter

Navigation

[0] Message Index

[#] Next page