SOHC.co.uk Forums > CB350/400

Cb400 F2 Swingarm Removal

(1/2) > >>

waffey:
Hi,

might be a daft question. I'm stripping my Honda down, I pulled the swing arm bolt out and I expected the swing arm to fall to the ground. It didn't fall out  :o, I gave it a wiggle but it wont dropped down. Have I missed something or do I need to persuade it out?

thanks in advance

Integra99:

Yes its just held in place by the bolt so in theory it should juts drop down. Over time its probably found itself at home and from memory mine required a gentle tap with a rubber mallet and some WD40 and she dropped out.

70sHonda:
Took mine out on a 750 recently; exactly as Integra says, just needs a bit of patience and careful use of the mallet and it frees up eventually. The other thing I found was to keep it ‘square’ when tapping out.

waffey:
ok, thanks, will have ago again this week

waffey:
ok, used the persuader tool and the swing arm is off  ;D

Navigation

[0] Message Index

[#] Next page