SOHC.co.uk Forums > CB350/400

Swing Arm Centre Bush - is it servicable????

<< < (2/4) > >>

Bryanj:
In the words of my long dead uncle " That is totally crodged mate" The collar is usually more worn than the bushes

Laverda Dave:
Steve at 400four bits has one on his site, no price but described as 'good' and it looks OK from the photo.
He's normally reasonable for prices and very helpful.

Orcade-Ian:
If you can’t get a good one and would like to use the original, I’m sure Philpotts would grind/hard chrome/grind yours.  Send the new bushes with it and tell them how much clearance you need.
Surely much cheaper than one fork leg as they don’t have to straighten it first. A phone call should get a ball park price.

Ian

Tomb:
May be better spray welded and skimmed back, but if spending that much why not have a replacement made.

waffey:
will take a look at the website

if I was to get one machined, is it ordinary steel? do I get a stainless one made? what tolerance on the bushes? out of solid bar? is the wall  thickness critical?

Navigation

[0] Message Index

[#] Next page

[*] Previous page