SOHC.co.uk Forums > CB350/400

Rear Shock Lower Bush Removal

(1/2) > >>

waffey:
Hi

last job on my swing arm, the removal of the bushes. I believe they are tapered, do they come out away from the bike or do they come out in the inside of the swing arm?

hairygit:
Not tapered, just a very tight press fit. If you have access to a press, they push out either side. If not, I would suggest taking it to a local engineering firm to do it for you, saves a lot of cursing and swearing!

Sent from my X6pro using Tapatalk

paul G:
Or a vice and two sockets ;D

waffey:
thanks for the reply.

just about to tackle it with the a jury rig of sockets etc

hacksaw standing by!

JamesH:
Oddjob’s method will save you a lot of time and hassle. I’d suggest doing that relief cut first (will take you 5 mins with a junior hacksaw) and then use the sockets to press out. Best of both methods...

Navigation

[0] Message Index

[#] Next page