SOHC.co.uk Forums > CB350/400

Plastic 5 pin plug for Ignition

(1/2) > >>

ogri211:
While checking my wiring on the rebuild I noticed that my ignition switch was connected to the loom with 5 individual spade connectors, this would have originally been a multi plug does anyone know if I can buy the correct one of these plugs to fix it to the switch.

Deano400:
Steve will cut plugs off old harnesses that you can splice in.
http://www.400fourbits.co.uk/

Deano400:
Alan can probably supply all the bits you need new.
http://alans-electrics.alanlowe.co.uk/home

BigAl (Alan):
I have all of the 6.3mm OE square latched connectors (and some un-latched) in stock, if you do require a pair/set, then please PM me.
Normally I do not sell individual parts, but for members on this site & VJMC I do make the exception.

Alan

ogri211:
Thanks for the input if the the connector is a standard 6.3 6 connector plug I think I may have one I am away from home just now working I should be able to sort something out.

Navigation

[0] Message Index

[#] Next page