SOHC.co.uk Forums > CB350/400

Rear chainguard Question

(1/6) > >>

ogri211:
Does anyone know if the rear chainguard round plate that is riveted to the original sprocket from any other models fits the 400 four as I would like to fit one but they seem rather hard to come by.

Orcade-Ian:
The 400 Honda parts list only shows the sprocket complete with the guard you need, so although that guard MIGHT have been fitted to other models, it’s not possible to do a parts cross reference in the normal way.  Is your sprocket already drilled - i.e. is it an original one?  Also, to complicate matters, there are 2 types -one with four indents and t’other without, although you might not mind either.

I’ll have a look to see if there is one lurking in a dark corner but you will also need alloy rivets, I couldn’t source them anywhere so I made some on the lathe.

Ian

AshimotoK0:
CB250/360G5  plate very similar if not identical. I can check if you wish. Funny coating on those plates a cross between olive drab & black? What do you reckon Ian?

Orcade-Ian:
Hi Ash,
Yes, the one on my US 400/4 with a very early frame number was satin black but the 76 ‘Scottish’ one was a kind of off black colour although now satin black after repairing a few scuffs and scratches, presumably where the chain had come off.  I’m too old now to bother about tiny differences but respect the views of the real aficionados.
Ian

ka-ja:
Also similar fitted to 250n, one laid on my garage floor for weeks.

Navigation

[0] Message Index

[#] Next page