SOHC.co.uk Forums > CB750

Clutch switch diode

<< < (4/4)

Bryanj:
Yes i think so

BigAl (Alan):
If there is no clutch switch or plug-in diode connected to the K6 loom 2-way connector, you will also need to ground the DARK GREEN/RED wire . (+ diode)  No wires connected to the LT GREEN/RED (- diode)
As image, you could use a 2-way male connector/6mm lead and attach to the frame terminal. The starter & neutral circuits will operate as  earlier version bikes.

philward:
Thanks Alan - much appreciated. As I said, should have bought a simpler K2 loom on reflection. I am now trying to fault find a modified new K6 loom as all electrics are under seat hump/shorai lithium battery, mated to Electrex narrow alternator (that doesn't come with instructions!), combined rec/reg,boyer high output coil ignition, combined LED rear light/indicators, bi-xeon mini headlight and digital speedo/idiot light thingy,

Navigation

[0] Message Index

[*] Previous page