SOHC.co.uk Forums > CB750

Simon46 1978 CB750K American project

<< < (3/9) > >>

Simon46:
Thanks HG. I've emailed DS part obsolete not in stock. Going to take it to Stockport hydraulics to see if they can do it in braided. Mines just not 2 pieces which I can get off ebay. Will report back on outcome.
Not sure the budget will stay under target for this build (again)

Sent from my G8141 using Tapatalk

Simon46:
Ah brand new batt drops from 11.8 (yes it's rundown with all the starting) to 11.3 when idling. More digging. Am searching the threads now.

Sent from my G8141 using Tapatalk

Simon46:
Preliminary testing  from the 3 yellow wires from the stator shows no reading from one to any others. However wiggle the wire where it goes into the engine and a reading briefly shows.
Field coil OK at 7 ohms.

Sent from my G8141 using Tapatalk

hairygit:
Obviously a break in the wires then, replacement wires being the easiest option.

Sent from my X6pro using Tapatalk

Simon46:
Honda parts seem to be more readily available than the yams. Will look into loom. Thanks HG

Sent from my G8141 using Tapatalk

Navigation

[0] Message Index

[#] Next page

[*] Previous page