SOHC.co.uk Forums > CB750

New CB750K6 camchain

<< < (4/4)

Trigger:
non upgraded chain should be a little lose, did you have a problem getting the sprocket back on the cam with the chain on ?
Your rocker cover gasket is upside down by the way, will leak if you don't turn it over  ;)

MikeSB6:
Hello, thanks for the tip (?) about the gasket, yes getting the sprocket on the cam was a push,

  Oddly enough, I turned the engine over again a couple of times to check, and the chain has loosened off to where it should be! Could the chain have seated onto the tensioner roller or something?

      Cheers, MikeJ

Trigger:
The sprocket should go on with ease. As I said, a mismatch of head and barrels can give you problems .

MikeSB6:
Well, thanks very much for the info., I'll investigate......

       Cheers, MikeJ

Navigation

[0] Message Index

[*] Previous page