SOHC.co.uk Forums > CB750

Headlight swap-Aussie to American

(1/1)

paulknapp:
Hello fellas, my '72 750 has a headlight reflector and glass with a bulb soldered in ex-factory,the way it is mounted there is no way i can fit a semi-sealed beam in so i could insert a h4 quarts bulb for better lights.   The bulb swap has been done to USA imported bikes here in Oz, so i have been told.
 My question is.. do all  USA bikes have as standard fitment a sealed beam unit as fitted to American cars, where a semi-sealed unit can fit straight in with a H4 quarts bulb?
If this is the case, if i purchase a reflector mounting unit which fits into the plastic shell with 3 screws, from a  USA wrecker, would i be able to fit whatever car reflector i wanted to??
 With thanks,  Pablo.
     Down under

CBen750F1:
mate i just used a 7' HQ holden  H4 headlight, and used its backing ring... ok i have lost beam adjustment, but i just move the hole buket and all to get the right height...hope this helps... peace

the boy from oz:P

paulknapp:
I'll answer my own question,
I purchased a headlight  rim with the rings to clamp sealed beam from Terry in Victoria, Aust. He apparently bought a box of them from USA on EBay. for a couple of his own bikes. Bought a new semi-sealed beam unit from local auto spares shop and fitted H4 bulb, and ...WALLA... bright lights
Cheers Paul
  Down under   B)

SteveD CB500K0:
Are you talking about Terry \"Three Nuts\" Prendergast? Boy gets around...

\"WALLA\" - is this Aussie for Voila ?

paulknapp:
The answers are ...Yes and Yes,  me 'ol  cobber,  ....although I haven't seen him drop his jock's to confirm..:whistle: ..:woohoo:
 Cheers Paul.B)

Navigation

[0] Message Index