SOHC.co.uk Forums > CB750

Electrical help

<< < (2/2)

Trigger:

--- Quote from: Underdog1 on June 29, 2018, 10:14:24 PM ---Just to clarify - the electrics should work when the key is in ignition position 1 right? (Once click clockwise), bikendoesnt have to be running for headlight horn etc

--- End quote ---

yep, and some 750's have the switch gear earth to the handle bars.

Underdog1:

--- Quote from: Trigger on June 29, 2018, 10:16:31 PM ---
--- Quote from: Underdog1 on June 29, 2018, 10:14:24 PM ---Just to clarify - the electrics should work when the key is in ignition position 1 right? (Once click clockwise), bikendoesnt have to be running for headlight horn etc

--- End quote ---

yep, and some 750's have the switch gear earth to the handle bars.

--- End quote ---

Literally have just read up on this, haven’t drilled my bars yet so I’ve had the switch gear just dangling, probably explains why at least some of the stuff isn’t working. Had a look through the electrics section of hondamans books and all the info is in there, just need to wrap my head around it!

Bryanj:
The black red, I think, goes down to one side of the headlamp fuse and the other too the LH switch. Have you got a lights ON/OFF on the RH switch.

This is one of the very few occasions when wires do not go colour to colour

Underdog1:

--- Quote from: Bryanj on June 30, 2018, 12:05:15 AM ---The black red, I think, goes down to one side of the headlamp fuse and the other too the LH switch. Have you got a lights ON/OFF on the RH switch.

This is one of the very few occasions when wires do not go colour to colour

--- End quote ---

Yeah I’ve got the on/off switch

BigAl (Alan):

--- Quote from: Underdog1 on June 29, 2018, 11:21:06 PM ---
--- Quote from: Trigger on June 29, 2018, 10:16:31 PM ---
--- Quote from: Underdog1 on June 29, 2018, 10:14:24 PM ---Just to clarify - the electrics should work when the key is in ignition position 1 right? (Once click clockwise), bikendoesnt have to be running for headlight horn etc

--- End quote ---

yep, and some 750's have the switch gear earth to the handle bars.

--- End quote ---

Literally have just read up on this, haven’t drilled my bars yet so I’ve had the switch gear just dangling, probably explains why at least some of the stuff isn’t working. Had a look through the electrics section of hondamans books and all the info is in there, just need to wrap my head around it!

Hondaman's book will be a great help. Also a drawing of the logic module (K3-K5) (aka Safety module) on page V-7

--- End quote ---

Navigation

[0] Message Index

[*] Previous page