SOHC.co.uk Forums > CB750

Speedo damping?

<< < (5/5)

Arch stanton:
Hello again.
Just to say Thank you to you all for your  patience, advice & explanations.
Following your advice i have successfully restored the damping on my clocks.
Cheers.
Sean.

Lecram:
I use silicone oil 100,000 CTS. I inject that with a 1.2mm syringe from the top into the damper, after disassembling the damper. That oil is very thick and hard to get this into the damper. So I made a special tool to make it a bit easier (I restore 40-50 gauges each month).
My experience with thinner oil is that this will not last for many years. And the risk of oil leakage is higher.

Navigation

[0] Message Index

[*] Previous page