SOHC.co.uk Forums > CB750

No strobe light from cylinder 1.

(1/2) > >>

El__burro:
Good day,
I have been trying to get my k2 running smoothly for a while.. but after checking
Timing,
Carb sync,
Points and gap,
Colortuned
..and using..
new coils, condensers, resistors and spark plugs..
my problem is almost unresolved.
the main dilemma is, when I check the timing with a strobe light gun, i have a good result by using the clamp on plugs 2, 3 and 4. Unfortunately 1 is a no show.
Strangely I have a decent spark on that plug.
Any suggestion to stop me going crazy?

thanks
el__burro

Sent from my SM-G935F using Tapatalk

petermigreen:
Try another plug.
I recently had a massive spark on a cylinder and could not get bike to fire. Changed plug and hey presto. Plug was breaking down under compression.


Sent from my iPhone using Tapatalk

Green1:
I too have had that on my Pegaso new plug with a nice big spark but it wouldn't run when fitted in the bike.

El__burro:
the bike fires up nicely, but after all (swapping plugs included) still no reading from strobe gun.. on plug 1/4.
The timing is set spot on on number 4 (still trying to figure out why..)

thanks
el__burro

Sent from my SM-G935F using Tapatalk

Seabeowner:
Only heard this am no expert, but read that if it's an inductive pickup then turning it over on the HT lead sometimes makes a difference.

Navigation

[0] Message Index

[#] Next page