SOHC.co.uk Forums > Project Board
1975 400/4 project
Sprocket:
Julie your indicator stalks are different to mine, they're chrome and look like they'll wobble about a lot less!
SteveD CB500K0:
Those black brackets look like they're from a 500.
Laverda Dave:
Julie, my brackets are the same as those on Sprockets bike. These are the brackets that were impossible to obtain new or s/h. I searched everywhere for a couple eventually getting a couple from ebay that need repair to the earth tangs. DS is (was?) making reproduction brackets when I last looked.
Sprocket, my rear handle looks the same as yours on both my original 400/4 and the one I restored a couple of years ago with a pattern handle.
Nurse Julie:
My indicator stalks are chrome aftermarket ones.
Sprocket:
--- Quote from: Laverda120 on January 22, 2019, 09:26:16 AM ---Julie, my brackets are the same as those on Sprockets bike. These are the brackets that were impossible to obtain new or s/h. I searched everywhere for a couple eventually getting a couple from ebay that need repair to the earth tangs. DS is (was?) making reproduction brackets when I last looked.
Sprocket, my rear handle looks the same as yours on both my original 400/4 and the one I restored a couple of years ago with a pattern handle.
--- End quote ---
Yeah I looked at the DS pattern stalks and the price made me purchase a tin of P38 and Hammerite! All the books pointed to them being OEM too, although as it happens my bike was a bit of a bitsa and I don't really trust anything!
And the handle. It's ok, but as previously highlighted, the 400 and 750 handles are the same length but the 400 should have a slight twist in it, to make it sit parallel to the frame. I suspect the 750 one mounts directly to the frame, where the 400 uses the indicator stalk hole.
I must admit, becoming nerdy about these things is actually fun. :D
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version