SOHC.co.uk Forums > CB750

Filter bolts?

<< < (2/2)

Arch stanton:
Hello Bryan.
I have a Serek oil cooler from a F1 i had yonks ago.
But i have lost the bolt adaptor that hold the sandwich plate in place. So i have had one made.
But when the filter bolt is tightened, the filter housing is 10mm of the plate. I cannot make the female thread any deeper,
But i can shorten the thread on the bolt.
This is why i asked about bolt lengths.
Sean.

Bryanj:
Sounds like that might be an F2 bolt, all the other 4's are the same so if you can get one of those to measure it would confirm it.

SumpMagnet:
I got an F2 bolt I can measure if that helps. It's all apart right now...so the bolt is in the parts pile

Navigation

[0] Message Index

[*] Previous page