SOHC.co.uk Forums > CB350/400
Fuse Box fun and more...
Athame57:
I've been on the DSS site add to my shopping....
Athame57:
--- Quote from: taysidedragon on October 07, 2018, 05:42:46 PM ---Looking at the state of the regulator box and connectors I would check and clean the connectors and earthing points.
--- End quote ---
I just googled Regulator box for cb400f and got images of the finned regulator/rectifier I just replaced. Yet it's called a regulator in the manual..trying to find one on the web. DDS don't seem to have one.
Bryanj:
They NEVER had the combined unit from Honda, only difference between 400 reg and all the othe 4's is the angle of the spade connectors
Athame57:
--- Quote from: Bryanj on October 07, 2018, 09:53:07 PM ---They NEVER had the combined unit from Honda, only difference between 400 reg and all the othe 4's is the angle of the spade connectors
--- End quote ---
I'm not saying they did, I wouldn't know. But when I put 'regulator honda cb400f' into google all I get is the Rectifier I replaced (from DSS) ...I have to go to images to see the thing in the pic, they get called Regulator/rectifier there.....it isn't helping.
taysidedragon:
You may not need to buy a new one.
Clean the spade connectors to get good electrical contacts. The box looks rusty but it's only a cover. The gubbins are inside. Check that there's no problem inside, if not just rub down the cover, repaint it
and replace. :)
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version