Other Stuff > Tricks & Tips

Seized Brake Bleed Nipple

<< < (2/5) > >>

Dave M:
Does anyone know the size and pitch of the banjo?

Bryanj:
If the bleeder threads are shot try this link

http://www.agriemach.com/product_info.php?cPath=cPath=44&products_id=842

To use a bajo + bolt the bolt has to have not many threads in the caliper due to the conical fitting that seals on the pipe M10 x 1.0 I THINK but dont hold me to it

Dave M:
That looks interesting Bryan.

Am I right in thinking that you drill a hole in the caliper, tap it and screw one of those things in?

pae:

--- Quote from: SteveD CB500F on March 29, 2008, 06:04:27 PM ---My "Silver Machine" 500 has a single braided front line.

As long as your back brake light works, this is not an MOT issue.

--- End quote ---

Is that right? Even if it had one originally? (Not that most - any - testers would know whether my 650 originally had a front switch or not).

regards, Phil

SteveD CB500K0:
Yes, I was slightly surprised as well.

If you have indicators fitted they MUST work, but as long as you have a brake light (and it doesn't matter which one), it's OK.

Navigation

[0] Message Index

[#] Next page

[*] Previous page