SOHC.co.uk Forums > Project Board
1976 CB550F1 (what have I let myself in for) Project
Bryanj:
But unfortunately you need to as there is a small earth wire that fixes on the coil mouting bracket and if it doesnt connect properly you get all sorts of odd problems, same as RH rear engine mount needs to have no paint either side where it touces engine case or you will melt the loom when you use the starter!!
eight0:
Brian is that the smaller green earth in the original wiring loom you're referring to? I'm ditching the original loom and running an M unit.
Bryanj:
Yesit is
eight0:
Thought I would post some long overdue pics of my very slow progress.
New Reg/Rec placement
[ Guests cannot view attachments ]
Battery and Starter Solenoid mounted
[ Guests cannot view attachments ]
Speedometer Bracket made and mounted, Needs cleaning up and painting
[ Guests cannot view attachments ]
Going to change the headlight brackets so they fit the smaller headlight better. I don't like the look of the spacers.
[ Guests cannot view attachments ]
[ Guests cannot view attachments ]
eight0:
[ Guests cannot view attachments ]
Ignore the droopy brake lever...
[ Guests cannot view attachments ]
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version